With all of the latest advances in solid state lighting technologies the requirement for efficient and practical thermal interface materials is more important than ever. Heat is the enemy of performance, LED manufacturers are looking to completely eliminate any overheating by using technically advanced cooling techniques whilst still using products which are reliable and will provide a long lasting hold.

Advanced Thermal Solutions, Inc. (ATS) has released nine new product lines for the thermal management of electronics. The new electronics cooling products consist of over 100 heat pipes, heat exchangers, chillers, thermoelectric modules and assemblie

Advanced Thermal Solutions, Inc. (ATS) has released a new liquid crystal thermographic analysis system, ethermVIEW™, for precise, optical temperature measurements of active PCBs and components.

Advanced Thermal Solutions, Inc. (ATS) will be presenting the free technical webinar, "Basics and Options in Thermal Modeling of Electronic Systems" on November 14, 2013 at 2pm ET and has released a new related case study.

Advanced Thermal Solutions, Inc., (ATS), is now officially in "active" status with the United States Federal Government's System for Award Management (SAM). ATS has already received several contracts with the US Government, including the US Nav

Qpedia, the media sponsor of coolingZONE-13, has announced a promotion offering a 30% discount on the widely read Qpedia Book Series. The promotion will take place at coolingZONE-13, the Thermal Management Industry International Summit in Boston, MA.

Dr. Camil Ghiu of Advanced Thermal Solutions, Inc. ("ATS") will be presenting at coolingZONE-13, the Thermal Management Industry International Summit, held in Boston, MA, October 21st - 23rd .

Advanced Thermal Solutions, Inc. (ATS) introduced the FSC-200™ fan speed controller. This device is designed to control the fan/fan tray speed where air flow control is critical for accurate thermal design.

Advanced Thermal Solutions, Inc.(ATS) has redesigned the CWT-100™, a research quality open loop wind tunnel designed for PCB and component level testing.

Advanced Thermal Solutions, Inc. (ATS) has released a new subscription plan for its engineering consulting services.

Advanced Thermal Solutions, Inc. ("ATS") has launched a new product line of maxiFLOW™ heat sinks, specifically designed for cooling standard eighth, quarter, half and full brick DC-DC converters.

Eco City Lights (ECL) recently contacted Advanced Thermal Solutions (ATS) for consulting on a thermal management solution for their new recycled LED application.

Cambridge Nanotherm has signed its first value added reseller agreement with printed circuit board (PCB) maker Spirit Circuits

Twenty four technical webinars on electronics thermal management will be presented in 2013 by the engineers of Advanced Thermal Solutions, Inc. Most will be 15 minute, specially-targeted training segments to fit an engineer's busy schedule.

coolingZONE, LLC., has just announced that it is running a holiday promotion on the Qpedia Book Series, discounting 25% off the normal retail value until December 31, 2012.

To characterize cold plates for use in electronic devices, the new iFLOW-200™ from Advanced Thermal Solutions, Inc., tests and measures the coolant's temperature at inlet and outlet, fluid flow rate and pressure drop, and surface temperature.

The TLC-100 from Advanced Thermal Solutions, Inc., now includes spray-on thermochromic liquid crystals which change color at different temperatures to reveal heat issues in electronic components.

ATS has just opened registration for its 4th Qtr 2012 Webinar Schedule, which includes three free technical presentations. Taught by industry leaders, these webinars provide education in key areas in the thermal management of electronics cooling.

Qats.com, the website of Advanced Thermal Solutions, Inc. (ATS), now provides engineers with precise and easier selection tools for finding the right heat sink for specific cooling requirements.

The CLWT-115 research quality, closed loop wind tunnel from ATS can generate air flows from ambient to 85°C and a rate of up to 50 m/s (10,000 ft/min) for thermally characterizing PCBs and individual components.

The new CLWT-115™ research quality, closed loop wind tunnel from ATS provides a convenient, accurate system for thermally characterizing PCBs and individual components at controlled temperatures from ambient to 85°C.

Advanced Thermal Solutions, Inc., (ATS), will present technical webinars on electronics cooling topics in July, August and September 2012. Each of these free events will provide engineering-level training in a key area of modern thermal management.

The new DAC-200™ Digital-to-Analog Converter outputs analog voltage proportional to digitally-collected air temperature and velocity data. Its linear output can be used in applications where other analog voltages are input from different sensors.

at IQPC's 2nd International Conference Thermal Management for EV/HEV, 27 - 29 June 2012 in Darmstadt

Dr. Kaveh Azar, President and CEO of Advanced Thermal Solutions, Inc., will present a full day course: Thermal Management of Electronics - Calculations, Measurements, Simulation, Review and Selection of Cooling Options at coolingZONE LED 2012 on Ma

Advanced Thermal Solutions, Inc. will present webinars on important electronics cooling topics in April, May and June 2012. Each of these free events will provide technical training at an engineering level in a different areas of thermal management.

Advanced Thermal Solutions, kicks off its 2012, monthly thermal engineering webinar series with its January to March schedule. Each webinar will thoroughly cover a different, important aspect of today's electronics cooling at an engineering level.

Dr. Kaveh Azar, president and CEO of Advanced Thermal Solutions, Inc. will discuss the impact of excess temperature on the performance, reliability and lifespan of LEDs, along with effective cooling options, at the 2012 Smart Lighting conference.

All electronics thermal management products from Advanced Thermal Solutions, Inc., (ATS) are now available in Canada from the Weiss Company. ATS cooling products include heat sinks, sensors, wind tunnels and instruments for thermal analysis.

Advanced Thermal Solution's Push Pin-Mounted maxiFLOW™ heat sink has been named one of the 2011 Hot 100 Products by EDN Magazine.

ATS successfully demonstrated an air cooling system for blade servers which are often used to power cloud computing datacenters. The patent pending system, using only standard chassis air flow, cooled a 1 KW heat load in a 1U chassis.

Advanced Thermal Solutions' next webinar is on October 27th, 2PM EST, ""Tools and Techniques for the Thermal Management of Small, Medium and Large Scale Data Centers". Registration is now open for this free webinar.

11th annual coolingZONE International Business & Technology Summit's Keynote, Dr. Suresh V. Garimella, Ph.D., to speak on Thermal and Energy Management Technologies for the Next Decade. The Summit will run October 5-6 in Cambridge, Massachusetts.

Solutions Direct Now Offers STEGO's Line of Thermal Management Products and Enclosure Accessories

MH&W International now provides U 90 silicone-free thermal interface materials (TIMs) with a new light tack adhesive to provide high thermal conductivity where contamination threats prevent the use of silicone-based thermal pads, and allow their easy