IPOS360x SX Multi-axis Motion System A Ready-to-run Solution For Compact Multi-Axis Systems !
The new Technosoft multi-axis Motion System, iPOS360x SX, helps project developers who design custom systems for complex motion control applications by giving them an extremely compact (100 x 98 x 37 mm) ready-to-run solution, based on the new family
Neuchatel (I-Newswire) February 15, 2013 - Complex motion control applications often require design of custom systems. This process is usually expensive and time consuming for the project developers. The new Technosoft multi-axis motion system – iPOS360x SX – makes this phase faster and easier, giving the designer an extremely compact (100 x 98 x 37 mm) ready-to-run solution based on the new family of iPOS drives.
iPOS360x SX allows you to plug in up to four iPOS3602 VX or iPOS3604 VX intelligent drives and provides all the necessary connectors (motor, encoder feedback and I/O signal) for each drive. The drives are connected through a CAN-bus link. Two CAN-bus connectors plus an optionally connectable terminal resistor ensure a rapid connection to any CAN-bus network configuration. An RS-232 link offers easy access to all drives, for setup and testing, using a standard PC. Future development of the iPOS360x SX will contain an Ethernet port and an Ethernet-to-CAN adapter while DIN rail mounting and metallic cover are available as option.
Using iPOS drives, the iPOS360x SX multi-axis motion system offers a cost-effective solution for controlling up to four rotary or linear brushless, DC brushed, or step motors (4 x 144 W, 4 x 36 V). Each iPOS360x drive has a built-in motion controller and provides PLC functionality. It can operate as a standard CiA402 CANopen slave drive or can be programmed to execute complex motion programs directly at drive level, using the high level Technosoft Motion Language (TML). The TML language programming allows each drive to execute complex motion sequences including setting of various motion modes, I/O signals handling, arithmetic and logic operations, conditional jumps and calls or data transfers between axes. The iPOS360x SX offer the possibility of implementing a multi-axis system by configuring any drive as master: the application master drive will call each axis to execute and confirm complex TML functions. The slave drives may also be programmed to periodically send information messages to the master drive so it can monitor each task’s progress. If the master is at the PC or PLC level, the iPOS360x drives operate as intelligent slaves in a similar manner as above while executing their TML program stored in the local non-volatile memory.
Technosoft is a leading DSP Motion Control technology company, specialized in the design and manufacture of motion control products and custom motions systems located in Neuchâtel, Switzerland.
Product specifications can be found at:
Technosoft is a leading motion control technology company specialized in the development, design and More.. manufacture of motion control products and custom motion systems. Technosoft is distinguished in its focus on innovative design based on the latest control technology, which has culminated in the design of MotionChip™ – a dedicated DSP solution for motion control that is embedded today in a broad range of intelligent servo drive products.Less..
Avenue des Alpes 20
Phone : +41 32 566 7050
Published On:February 15, 2013
Print Release:Print Release
If you have questions regarding information in this press release contact the company listed above. I-Newswire.com is a press release service and not the author of this press release.The information that is on or available through this site is for informational purposes only and speaks only as of the particular date or dates of that information. As some companies and PR Agencies submit their press releases once per week,month or quarter, make sure to check the official company website for accurate release dates as our site displays the I-Newswire.com press release distribution date only.We do not guarantee the accuracy or completeness of information on or available through this site, and we are not responsible for or omissions in that information or for actions taken in reliance on that information.
Online New Nuovasimat.com, Leader in Mechanical Maintenance Field
RETTEW Appoints General Counsel
CFD Outsourcing Advances Rotation Machinery Analysis in Its Portfolio
HiTech Recommends Finite Element Analysis (FEA) for Speed Engineering Analysis
Studio 2055 Announces Rebranding and New Website for Hope-Amundson Structural Engineers